Worx Nitro WG761E Manual Original página 11

complete stop;
o) Do not start the lawnmower
when standing in front of
the discharge opening.
p) Do not transport the
lawnmower while the power
source is running.
q) Stop the lawnmower,and
remove the disabling
device. Make sure that all
moving parts have come to
a complete stop.
– whenever leaving the
machine unattended,
– before clearing a blockage,
– before checking, cleaning
or working on the machine,
– after striking a foreign
object. Inspect the
machine for damage
and make repairs before
restarting and operating the
lawnmower
If the lawnmower starts to
vibrate abnormally (check
immediately)
- inspect for damage.
- replace or repair any
damaged parts.
- check and tighten any loose
parts.
Maintenance and storage
a)keep all nuts, bolts and
screws tight to be sure
the equipment is in safe
Cordless Lawn Mower
working condition;
b)check the grass cacher
frequently for wear or
deterioration;
c)replace worn or damaged
parts for safety. Use only
genuine replacement parts
and accessories.
d)Be careful during adjusting
of the lawnmower to
prevent entrapment of the
fingers between moving
blades and fixed parts of
the lawnmower.
e)Always allow the
lawwnmower to cool down
before storing.
f) When servicing the blades
be aware that, even though
the power source is
switched off, the blades can
still be moved.
SAFETY WARNINGS FOR
BATTERY PACK
a)Do not dismantle, open
or shred cells or battery
pack.
b)Do not short-circuit a
battery pack. Do not
store battery packs
haphazardly in a box or
drawer where they may
short-circuit each other
or be short-circuited by
11
EN