Bosch KGN49SQ21 Instrucciones De Montaje página 8

en
Installation in cavity
The appliance must project 15 mm
beyond the furniture on either side
to ensure that the doors can be opened
by 125°.
Changing over
the door hinges
(if required)
We recommend that you have the door
hinges changed over by our customer
service. You can find out the costs for
changing over the door hinges from your
appropriate customer service.
ã=
Warning
While changing over the door hinges,
ensure that the appliance is not
connected to the power supply. Pull out
the mains plug beforehand. To prevent
damaging the back of the appliance,
place adequate padding underneath.
Carefully place the appliance on its back.
8
Change over the door hinges
in numerical sequence. Fig. 1
Note
If the appliance is placed on its back,
ensure that the wall spacer is not fitted.
Fitting the wall spacer
Fig. 2A/B
If available:
Fit wall spacers to obtain the indicated
energy rating of the appliance.
A reduced wall gap will not restrict
the function of the appliance. The energy
rating may then increase slightly.
Aligning the appliance
Place the appliance in the designated
location and align. Adjust the height-
adjustable feet with a wrench.