Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Step 5: Attach Bottom Bowl and Damper
Align the holes in the bottom bowl (I), upper cart
frame (N). Then attach the bottom bowl (I) onto
upper cart frame (N) with four M6x45 bolts (CC) and
four M6 nuts (FF).
Attach the damper (V) show in Fig.5.
Hardware Used
M6x45
CC
Bolt
M6
FF
Nut
Step 6: Attach Lid Handle and Temperature Gauge
Remove the wing nut and washer pre-assembled
on the temperature gauge (A). Then attach the
temperature gauge (A) onto the lid (D) with the wing
nut and washer.
Attach lid handle (B) onto the lid (D) with two M6x20
bolts (BB) and two Ø16x6.2 washers (DD) and two
Ø6 lock washers (GG).
Hardware Used
M6x20
BB
Bolt
Ø16x6.2
DD
Washer
Ø6
GG
Lock Washer
5
x 4
x 4
6
B
x 2
x 2
A
x 2
8
I
N
First
Second
V
Third
Fourth
D
Publicidad
