ASSEMBLY STEP 1
BOLT (A)
20 mm
Qty: 4
612T
LEFT CONSOLE MAST
ARC WASHERS (D)
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
BASE FRAME
HARDWARE BAG 1 CONTENTS :
SPRING WASHER (B)
8 mm
Qty: 4
622T PLUS
LEFT CONSOLE MAST
FLAT WASHER (C)
8 mm
Qty: 2
Cut the yellow banding straps and lift the
A
RUNNING DECK upward and remove all
contents from underneath the running deck.
Open HARDWARE BAG 1.
B
With the RUNNING DECK lowered, attach
C
the LEFT CONSOLE MAST to the BASE
FRAME using 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 FLAT WASHERS (C)
from the side and 2 BOLTS (A), 2 SPRING
WASHERS (B) and 2 ARC WASHERS (D)
from the rear.
ARC WASHER (D)
MODELS
8 mm
Qty: 2
ALL
11