General Outline - BFT IGEA Instrucciones De Uso

ENGLISH
Thank you for buying this product. Our company is sure that you will be more
than satisfied with the product's performance. Carefully read the "WARNINGS"
pamphlet and the "INSTRUCTION BOOKLET" which are supplied together
with this product, since they provide important information regarding the safety,
installation, use and maintenance of the product. This product complies with
recognised technical standards and safety regulations. We declare that this
product is in conformity with the following European Directives: 73/23/ EEC,
89/336/EEC, 98/37/EEC and subsequent amendments.

1) GENERAL OUTLINE

This controller is suitable for residential use and has been designed for swing
gates with particularly large gate posts. The drive arm, built with a special
anti-shearing shape, allows the leaves to be moved when the controller is
considerably out of place with respect to the fulcrum of the leaves.
The non-reversible electro-mechanical gearmotor maintains the stop during
closing and opening.
The release knob with personalised key, fitted outside each operator, makes
manual manoeuvre extremely easy.
WARNING! The installation, the maintenance and the repair should be
done by responsible and qualified persons with an updated knowledge of
the current safety standards. It's strictly forbidden to service the automation
when the power is on.
ATTENTION! The IGEA model controller is not equipped with mechanical
torque adjustment. It is compulsory to use a control panel of the same ma-
nufacturer, in compliance with the basic safety requirements of directives
73/23/CEE, 89/336/CEE, 89/37/CEE equipped with appropriate electric
adjusment of the torque.
2
3
4 -
IGEA Ver. 07
USER'S MANUAL
LEFT
1
2) EMERGENCY MANOEUVRE (Fig. 1)
In the case of power failure or operation malfunctions, manual emergency
manoeuvre can be carried out by turning the external release knob with
personalised key.
First turn the key clockwise, then rotate the release knob to free the gate.
The knob is to be rotated anticlockwise in the case of a left-hand leaf,
clockwise in the case of a right-hand leaf.
Keep the knob in its release position by turning the key further. Push the leaf
slowly to open or close the gate.
To reactivate motor-driven operation, free the knob from its release position
and bring it back to its initial position for normal operation.
WARNINGS
Correct controller operation is only ensured when the data contained
in the present manual are observed. The company is not to be held
responsible for any damage resulting from failure to observe the
installation standards and the instructions contained in the present
manual.
The descriptions and illustrations contained in the present manual are
not binding. The Company reserves the right to make any alterations
deemed appropriate for the technical, manufacturing and commercial
improvement of the product, while leaving the essential product fea-
tures unchanged, at any time and without undertaking to update the
present publication.
Fig. 1
1
2
3
RIGHT