Adjusting Brush Height; Draining Tanks; Draining Recovery Tank; Draining Leftover Cleaning Solution - Nobles Frontier 608549 Manual Del Operador Y Piezas

OPERATION
5. Begin operating accessory tool (Figure 5).
FIG. 5
NOTE: When cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.
6. After operating accessory tool, relieve water
pressure from tool before disconnecting hose.
Squeeze trigger for five seconds after turning off
switches.

ADJUSTING BRUSH HEIGHT

1. Turn off machine and unplug power cord from wall
outlet.
FOR SAFETY: Before leaving or servicing
machine, turn off machine and unplug cord from
wall outlet.
2. To adjust brush height, use a standard screwdriver
and turn brush height adjustment lever in 1/4 turn
increments, 4 settings (Figure 6).
FIG. 6
6
Home Find... Go To..

DRAINING TANKS

FOR SAFETY: Before leaving or servicing
machine, turn off machine and unplug cord from
wall outlet.
NOTE: Always use separate buckets when draining
and filling machine.

DRAINING RECOVERY TANK

1. Turn off power switch and unplug power cord.
Raise brush lift handle and transport machine to
draining area.
2. Turn drain hose knob counterclockwise and pull
plug out to drain (Figure 8).
FIG. 7
3. After draining, replace drain hose knob securely.

DRAINING LEFTOVER CLEANING SOLUTION

1. Connect 1 m (3 ft) pump-out hose, supplied with
machine, to machine's solution coupler (Figure 8).
FIG. 8
2. Direct the hose into a bucket or floor drain.
3. Turn on main power switch.
NOTE: You can also use the pump-out hose to rinse
out recovery tank when there's leftover water.
Frontiert Carpet Extractor (11–99)