ROBBE POWER PEAK TRIPLE 360 W EQ-BID Manual De Uso página 41

POWER PEAK® TRIPLE 360 W EQ-BID
'+' but-
ton
'+' but-
ton
'+' but-
ton
ENTER'
button
8.2 PROGRAMMING METHOD (E.G. PROGRAMMING THE DATE)
The programming procedure is started in this screen display after you press the 'ENTER'
button to activate the programming loop.
used, a date can be entered in the form 'YYYY-MM-DD'.
The programming of the dates information is initiated by pressing ENTER. In addition
to the '+' and '-' signs the year flashes in the top line. It can be updated with the 'INC' or
'DEC' button. After pressing ENTER again the months flashes and can be edited with the
© robbe Modellsport
Operating instructions
ENTER'
button
ENTER'
button
ENTER'
button
Finally, all parameters can then be specified by
following exactly the same procedure as for setting
the parameters in manual mode (see Section 7.2).
To keep track of the data of when a battery was first
'INC'/DEC-' button. The day is set in the same way.
The setting is finally entered to memory by pressing
ENTER.
'+'
button
'+'
button
'+'
button
17
Order No.
8562
ENTER'
button
ENTER'
button
ENTER'
button