Menu Structure In Automatic Mode; Settings In Automatic Mode - ROBBE POWER PEAK TRIPLE 360 W EQ-BID Manual De Uso

POWER PEAK® TRIPLE 360 W EQ-BID
6.1 Menu Structure for Automatic Mode (only NC and NiMH)
'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
'MODE'
button
6.2

SETTINGS IN AUTOMATIC MODE

The battery charger automatically sets the charging/discharging current and the number of
cells in automatic mode. This mode is only available for NC and NiMH battery packs. The
three operations (CHARGE, DISCHARGE, DISCHARGE->CHARGE) available for the two
types of battery are selected with the MODE button.
With the battery connected, the required operation is initiated by pressing the START but-
ton. The working display will now appear (see chapter 5.1). The current display alternates
with the word 'auto' to indicate that the charger is in automatic mode.
The process can be terminated by pressing the STOP button; the display for automatic
mode is then shown again. When the process is complete, the achieved final values are
shown in the display (charge/discharge capacity, process time, battery type, battery voltage
and current).
© robbe Modellsport
Operating instructions
'START'
button
'START'
button
'START'
button
'START'
button
'START'
button
'START'
button
10
Order No.
8562