Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to Use the Adjustable Nozzle
You should now know how to START and STOP your
pressure washer.The information in this section will tell
you how to adjust the spray pattern and to apply detergent
or other cleaning chemicals.
CAUTION
A pressure washer produces a high pressure spray
which increases risk of injury and damage to unit.
• NEVER adjust spray pattern when spraying.
• NEVER put hands in front of nozzle to adjust spray pattern.
1.
Slide nozzle forward when you wish to adjust spray to
low pressure mode (Figure 9). Slide nozzle backward
to achieve high pressure.
Figure 9 — Adjusting Nozzle for Pressure
Slide nozzle backward
for High Pressure
Mode
SpeedClean™ 2000 PSI Pressure Washer
Slide nozzle forward for low
pressure mode and
detergent application
2.
Point nozzle down towards a firm surface and press
trigger to test pattern (Figure 10).
Figure 10 — Testing the Spray Pattern
3.
Twisting nozzle adjusts spray pattern from a narrow
pattern to a fan pattern (Figure 11).
Figure 11 — Adjusting the Nozzle for Spray Pattern
Rotate nozzle
counterclockwise for fan
spray pattern
4.
For most effective cleaning, keep spray nozzle from
8 to 24 inches away from cleaning surface.
5.
If you get spray nozzle too close, especially using high
pressure mode, you may damage surface being cleaned.
6.
DO NOT get closer than 6 inches when cleaning tires.
9
Rotate nozzle clockwise
for narrow spray pattern
Publicidad
Capítulos
Tabla de contenido
