RIDGID HD1200 Manual Del Usuario página 8

ACCESSORY & HOSE STORAGE
ACCESSORY STORAGE (Fig. 10)
1. For Storage: Slide the Extension Wands (K) and the
Accessories (L, M, & N) onto the Caster Feet Posts.
2. To Remove Wands and Accessories: Lightly rotate
and pull upward.
CORD STORAGE (Fig. 10)
1. To Store Cord: Wrap Power Cord around the top Carry
Handle / Power Cord Wrap (D) beneath the Two Tabs.
2. Secure the Power Cord using the Cord Clip on the
Polarized Plug.
HOSE STORAGE (Fig. 10)
1. The Tug-A-Long Positive Locking Hose with Dual-Flex
(J) may be stored around the Powerhead Assembly (A)
using the Two Hose Storage Clips (F).
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything
that may reduce air flow.
CAUTION:
Do not operate vacuum while the hose is still
wrapped around the powerhead assembly in the
storage position.
Power
Cord
(A)
(J)
Hose
Storage
Clips
(L)
Caster
Feet Post
8
Fig. 10
(D)
Cord Clip
(K)