ProBreeze PB-H02 Manual De Instrucciones página 5

ASSEMBLY
1. Unpack the castor wheels and arc-shaped brackets from the heater packaging.
2. Turn the radiator upside-down on a scratch-free and stable surface to prevent
damage to the paint finish or your floor surfacing.
3. Fit the two (2) castor wheels onto the radiator by placing the arc-shaped
brackets between the outermost radiator fins on each side of the radiator.
4. Securely fasten the two (2) castor wheels onto the radiator by screwing two (2)
wing nuts onto each foot.
5. Turn the radiator back upright once the castor wheels have been fitted.
CAUTION: Only operate the radiator when in its normal upright position with the
castor wheels fitted to the bottom of the unit.
OPERATION
1. Place the heater upright on a flat, steady and heat-resistant surface.
2. Turn the thermostat dial anti-clockwise to LOW and ensure the power switch is
'O' OFF.
3. Insert the plug into a suitable socket.
4. Turn the power switch dial clockwise to the desired power:
• 'I' – Low Heat
• 'II' – Medium Heat
• 'III' – High Heat
English | 4