Publicidad
Idiomas disponibles
Idiomas disponibles
Repeat play
1
Press and hold the multi-way encoder.
2
Rotate the multi-way encoder to select
the "Repeat," then press it.
3
Rotate the multi-way encoder to select
the setting, then press it.
The setting is complete.
4
Press
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
(with the card remote commander)
1
During playback, press (1) (REP)
repeatedly until the desired setting
appears.
After 3 seconds, the setting is complete.
Select
Repeat Track
Repeat Album*
1
Repeat Artist*
2
*1 Available when selecting track by "Album" or
"Folder & File" with Quick-BrowZer (see page 23).
*2 Available when selecting track by "Artist" with
Quick-BrowZer (see page 23).
To return to normal play mode, select "Repeat
off."
Shuffle play
1
During playback, press and hold
(ZAP/SHUF).
2
Press (ZAP/SHUF) repeatedly until the
desired setting appears.
(with the card remote commander)
1
During playback, press (2) (SHUF)
repeatedly until the desired setting
appears.
After 3 seconds, the setting is complete.
Select
Shuffle Album*
1
Shuffle Artist*
2
Shuffle Device*
3
*1 Available when selecting track by "Album" or
"Folder & File" with Quick-BrowZer (see page 23).
To play
track repeatedly.
album repeatedly.
artist repeatedly.
To play
album in random order.
artist in random order.
device in random order.
*2 Available when selecting track by "Artist" with
Quick-BrowZer (see page 23).
*3 Available when selecting track by "Track" or "Folder
& File" with Quick-BrowZer (see page 23).
To return to normal play mode, select "off. "
Note
Playing tracks on shuffle play is selected from a
current USB device.
Enjoying music according to
your mood — SensMe™
Sony's unique "SensMe™ channels" features
automatically group tracks by channel, and allow
you to enjoy music intuitively.
Before using the SensMe™
function
The following is the basic procedure required to
enjoy the SensMe™ function on the unit.
1 Download the "SensMe™ Setup" and
"Content Transfer" software from the
support site
2 Install the software in your computer
For more details on the installation, visit
http://esupport.sony.com
or
http://www.sony.com/mobileAV
3 Registering a USB device using
"SensMe™ Setup"
Connect a USB device to your computer, and
perform registration using "SensMe™ Setup"
to enable the SensMe™ function on this unit.
SensMe ™
Setup
Tip
Registration can be performed either along with the
installation procedure or after installation.
continue to next page t
15
Publicidad
