Publicidad
Idiomas disponibles
Idiomas disponibles
4 Transferring tracks to the USB device
using "Content Transfer"
In order to group tracks by channel, track
sound patterns need to be analyzed by 12
TONE ANALYSIS™, which is loaded in
"Content Transfer."
With the USB device connected to your
computer, drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
Both analysis and transfer of tracks will be
performed by "Content Transfer."
5 Connecting the USB device and
enjoying the SensMe™ function on the
unit
Connect the set up USB device. You can then
enjoy "SensMe™ channels" on this unit.
Installing "SensMe™ Setup" and
"Content Transfer" in your
computer
The software ("SensMe™ Setup" and "Content
Transfer") is required to enable the SensMe™
function on this unit.
1
Download the "SensMe™ Setup" and
"Content Transfer" software from the
support site.
2
Install the software in your computer.
For more details on the installation, visit
http://esupport.sony.com
or
http://www.sony.com/mobileAV
Registering a USB device using
"SensMe™ Setup"
USB device registration is required to enable the
SensMe™ function on the unit.
If registration is not performed along with the
installation procedure, follow the steps below.
1
Start "SensMe™ Setup" on your
16
computer.
Content
Transfer
2
Connect a USB device to your
computer.
3
Complete registration following the
on-screen instructions.
Tip
If you connect a registered USB device containing
analyzed tracks, the USB device can be unregistered
again.
Transferring tracks to the USB
device using "Content Transfer"
To enable the SensMe™ function on this unit,
tracks need to be analyzed and transferred to the
registered USB device, using "Content Transfer."
1
Connect the registered USB device to
your computer.
For USB devices, connect with the MSC
mode.
"Content Transfer" starts automatically.
If a message appears, follow the on-screen
instructions to proceed.
2
Drag and drop tracks from Windows
Explorer or iTunes, etc., to "Content
Transfer."
The analysis and transfer of tracks start.
For details on operations, see the Help of
"Content Transfer."
Note
The track analysis by 12 TONE ANALYSIS™ may take
time, depending on the computer environment.
Playing tracks in the channel
— SensMe™ channels
"SensMe™ channels" automatically group tracks
into channels by their tunes. You can select and
play a channel that fits your mood, activity, etc.
This function works for USB devices connected
to the internal/external or both USB connector.
To switch the USB device, press (MODE).
1
Connect a USB device set up for the
SensMe™ function.
2
Press
(SensMe™).
The channel list appears, and the most
melodic or rhythmical sections* of tracks are
shuffle played.
* May not be detected correctly.
Publicidad
