Teac PD-D2610 Manual Del Usuario página 8

Digital Audio Device
(CD Recorder, etc.)
CAUTION:
< Switch off the power to all equipment before making
connections.
< Read the instructions of each component you intend to use
with this unit.
< Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
A
DIGITAL OUT terminal
Connect the digital output terminal to the digital input
terminal of a digital device such as a CD recorder, MD deck,
etc. Use a commercially-available optical or coaxial digital
cable.
< Keep the supplied cap to cover the optical digital terminal
when it is not in use.
8
All manuals and user guides at all-guides.com
Connection
A
OPTICAL COAXIAL L
DIGITAL CD IN
IN
Amplifier
B
R
B
LINE OUT jack
Analog 2-channel audio signal is output from this jack.
Connect this jack to the CD input jack of the amplifier with
an RCA cable.
Make sure to connect :
white plug q white jack (L: left channel)
red plug q red jack (R: right channel)
C
AC Power Cord
After all other connections are complete, connect the plug
to the AC wall socket.
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Grasp the plug, not the cord when plugging or unplugging
the power cord.
PD-D2610
C