Hilti BX 3-SCT Manual De Instrucciones Original página 11

4 Technical data
4.1 Fastening tool
Weight including battery B22⁄2.6
Fastener guide
Fasteners
Length, fastener
Fastener diameter
Compression stroke
Contact pressure
Application temperature (ambient temperature)
Application temperature, fastener
Recommended maximum driving rate
Rated voltage
5 Preparing the tool for use
5.1 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.2 Removing the battery
1. Press the battery release buttons.
2. Remove the battery from the tool.
5.3 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.4 Removing the fastener guide
1. Switch off the fastening tool.
2. Remove the battery.
3. Remove the fastener from the fastener guide.
4. Slide the fastener guide locking catch as far as it will go in the direction of the arrow.
▶ The fastener guide will be released.
5. Remove the fastener guide.
*2338837*
4.0 kg
(8.8 lb)
X­FG B3­SCT 02
•
•
•
52 mm / 62 mm / 87 mm
(2.0 in / 2.4 in / 3.4 in)
3.5 mm
(0.14 in)
12 mm
(0.5 in)
50 N ... 70 N
(11 lb
−15 ℃ ... 50 ℃
(5 ℉ ... 122 ℉)
−10 ℃ ... 50 ℃
(14 ℉ ... 122 ℉)
650/h
21.6 V
2338837
X­M6­8­52 DP7 SCT B3
X­M6­8­62 DP7 SCT B3
X­M6­8­87 DP7 SCT B3
... 16 lb )
f f
English 7