KRHÜNER 29336 Manual De Instrucciones página 10

HOW TO USE
Speed control: turn the switch to the on position and switch to any of the speed posi-
tions (1-2-3).
Oscillation: push down the oscillation knob and the fan will oscillate. Pull up to stop.
Tilting adjustment: the air flow can be adjusted upward or downward by simply moving
the guard up or down.
Height adjustment: loosen the height adjustment knob and adjust the pipe to the de-
sired position and tighten the knob.
3. MAINTENANCE & CLEANING
SOLUTION FOR SIMPLE FAILURES
When starting the fan, the fan blade doesn't work. Please check whether the power plug
has really inserted into the socket or the cover has distorted and it contacts with the fan
blade. If there is noise when starting the fan, please check the unit as follows:
1. The fan blade has been tight installed into the output shaft of the motor.
2. The groove on the back of the cover has matched the groove on the output shaft.
3. There are tiny defective edges around the fan blade.
4. The cover has distorted and it contacts with the fan blade.
MAINTENANCE
Be sure to switch off the power supply and pull out the plug before cleaning.