Domair TFB50 Instrucciones De Uso página 31

•
If the
damaged,
changed
manufacturer,
Foot mounting
7- Unwind the power cord sufficiently. Then unscrew and remove the plastic
screw at the bottom of the column.
8- Remove the 4 metal screws on one half of the leg.
9- Carefully place the power cord in the passageway on the back of the foot.
Be careful, it is important to ensure that the cord does not suffer any damage
during the foot assembly operations.
Rev 2 _ 27 08 19 Fabriqué en Chine Page 31
power cable
it must
by
maintenance department or
is
a similarly qualified person
be
to
the
hazardous situation.
its
avoid a potential