Publicidad
Idiomas disponibles
Idiomas disponibles
6.- MOUNTING THE REAR
SUPPORT.-
Position rear support (3) on the bottom
of rail (2), Fig.3. Insert screws (38)
and washers (39) and then firmly
tighten with the 6mm Allen wrench.
7.- MOUNTING THE
ELECTRONIC CONSOLE.-
Remove the insulating strip located on
the back of the monitor (81) for
batteries make contact and make sure
the monitor is turned on.
Position the electronic console (81)
next to the seat in the main frame (1)
Fig.5.
Connect the console terminals (81),
with the terminals running from the
main frame (1) Fig.5A, and insert the
console in the seat in the main frame
(1) Fig.5, taking care with the cables.
LEVELLING.-
Once the unit has been placed into its
final position for doing exercise, make
sure that it sits flat on the floor and
that it is level. This can be achieved by
screwing
the
blocks (24) up or down, as shown in
Fig.6.
adjustable
support
MOVEMENT & STORAGE.-
The unit is equipped with wheels (14)
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.4. Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION.-
Insert the jack (m) for the transformer
into the connection hole on the main
body (k) (bottom, rear of the machine)
and then plug the transformer (6) into
a 230 V mains supply, Fig.6.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
11
Publicidad
