Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the surface of the filter
Clean the surface of filter with vacuum cleaner when the filter cleaning alert
display on the screen (fig z)�
1
Pull the back cover and remove it from the appliance (fig c)�
2
Pull the filter from the appliance (fig {)�
3
Clean the surface of the filter with a vacuum cleaner (fig |)�
4
Put the filter back into the appliance (fig f)�
5
Reattach the back cover (fig g)�
6
Touch the
button to switch on the appliance (fig h)�
7
Touch and hold the filter status check/reset button
reset the filter cleaning time (fig })�
8
Wash your hands thoroughly after cleaning the filter (fig ~)�
Replacing the filter
Note:
• The filter is not washable or reusable�
• Do not smell the filter as it has collected pollutants from the air�
When the filter need to be replaced, the filter replacement alert
red (fig )�
1
Replace the filter with Philips NanoProtect filter Series 3 (FY2180/30),
Please follow the step of Chapter "Installing the filter"�
2
Touch the
button to switch on the appliance (fig h)�
3
Touch and hold the filter status check/reset button
reset the filter replacement time (fig €)�
4
Wash your hands thoroughly after replacing the filter (fig ~)�
Filter reset
You can also replace the filter before filter replacement alert (
the screen� After replacing a filter, you need to reset the filter lifetime counter
manually�
1
Touch the power
unplug from power socket(fig h)�
2
Put the power plug in the power socket (fig )�
3
Within 15 seconds after power on, touch and hold
3 seconds to reset the filter lifetime counter (fig ‚)�
button for 3 seconds to turn off the appliance and
for 3 seconds to
lights up
for 3 seconds to
) displays on
and
button for
EN
7
Publicidad
