Descargar Imprimir esta página

VALBERG CF 246 E W742C Instrucciones De Uso página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

B
Daily use
Cleaning the interior
Before using the appliance for the first time, wash the interior and all internal accessories
with lukewarm water and some neutral soap so as to remove the typical smell of a brand new
product, then dry thoroughly.
IMPORTANT
Do not use detergents or abrasive powders, as these will
damage the finish.
Running indicator light
Electrical connection
When the appliance is plugged in, all LED indicator lights will flash once. Then the appliance
will resume the mode previously set before the electrical outage.
Temperature setting
Setting
Press «SET» button, enter the temperature setting mode. The temperature indicator bar
goes up a scale by each press. This setting runs in cycles.
Temperature can run from Scale MIN to Scale MAX. Scale MAX is the coldest.
The temperature is automatically set in 5 seconds after the press.
TIP
Normally, it's recommended to set the temperature to
«NORMAL» or colder for optimum food preservation. The
longest storage time in this situation is no more than 1
month. Not set recommended setting may reduce the
storage time.
Using the appliance
Temperature indicator light
8
EN
Fast freezing indicator light
Set key
OFF key

Publicidad

loading

Este manual también es adecuado para:

Cf 287 e w742c977613977614