Descargar Imprimir esta página

Craftsman 316.77380 Serie Manual Del Operador página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

WHILE OPERATING
• Wear safety glasses or goggles that are marked as meeting ANSI Z87.1-
1989 standards. Also wear ear/hearing protection when operating this
unit. Wear a face or dust mask if the operation is dusty. Long sleeve shirts
are recommended.
• Wear heavy, long pants, boots and gloves. Do not wear loose clothing,
jewelry, short pants, sandals or go barefoot. Secure hair above shoulder level.
• This unit has a clutch. The blade remains stationary when the engine is idling.
If they do not, have the unit adjusted by an authorized service technician.
• Be sure the blade is not in contact with anything before starting the unit.
• Use the unit only in daylight or good artificial light.
• Avoid accidental starting. Be in the starting position whenever pulling the
starter rope. The operator and unit must be in a stable position while
starting. See Starting/Stopping Instructions.
• Use the right tool. Only use this tool for the purpose intended.
• Use extreme caution when reversing or pulling the unit backwards.
• Do not overreach. Always keep proper footing and balance. Take extra
care when working with on steep slopes or inclines.
• Always hold the unit with both hands when operating. Keep a firm grip on
the handle.
• Keep hands, face, and feet at a distance from all moving parts. Do not
touch or try to stop the blade while it is rotating.
• Do not touch the engine or muffler. These parts get extremely hot from
operation. They remain hot for a short time after turning off the unit.
• Do not operate the engine faster than the speed needed for the job. Do
not run the engine at high speed when the unit is not in use.
• Always stop the engine when work is delayed or when walking from one
location to another.
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete
safety, assembly, operating and maintenance and repair information.
SYMBOL
MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in
conjunction with other symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
Read the operator's manual(s) and follow all
warnings and safety instructions. Failure to do so can result
in serious injury to the operator and/or bystanders.
• WEAR EYE AND HEARING PROTECTION
WARNING:
Thrown objects and loud noise can cause
severe eye injury and hearing loss. Wear eye protection
meeting ANSI Z87.1-1989 standards and ear protection when
operating this unit. Use a full face shield when needed.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
RULES FOR SAFE OPERATION
• If striking or becomes entangled with a foreign object, stop the engine
• Stop and switch the engine to off for maintenance or repair.
• Use only original equipment manufacturer replacement parts and
• Keep unit clean of vegetation and other materials that may become
• To reduce fire hazard, keep the engine and muffler free from grass, leaves,
AFTER USE
• Clean the unit with household cleaner to remove any gum buildup. Oil the
OTHER SAFETY WARNINGS
• Never store a fueled unit inside a building where fumes may reach an
• Allow the engine to cool before storing or transporting. Be sure to secure
• Store the unit in a dry area, locked up or up high to prevent unauthorized
• Never douse or squirt the unit with water or any other liquid. Keep handles
• Keep these instructions. Refer to them often and use them to instruct other
• SAFETY & INTERNATIONAL SYMBOLS •
3
immediately and check for damage. Do not operate before repairing
damage. Do not operate the unit with loose or damaged parts.
accessories for this unit. These are available from an authorized service
dealer. The use of any unauthorized parts or accessories could lead to
serious injury to the user, or damage to the unit, and void the warranty.
lodged or entangled in the unit.
excessive grease or carbon build up.
blade with machine oil to prevent rust.
open flame or spark.
the unit while transporting.
use or damage. Keep out of the reach of children.
dry, clean and free from debris. Clean after each use. See the Cleaning
and Storage instructions.
users. If loaning someone this unit, also loan them these instructions.
SAVE THESE INSTRUCTIONS
SYMBOL
MEANING
• DO NOT USE E85 FUEL IN THIS UNIT
WARNING:
greater than 10% ethanol will likely damage this engine and
void the warranty.
• THROWN OBJECTS AND ROTATING CUTTER CAN
CAUSE SEVERE INJURY
WARNING:
Small objects can be propelled at high
speed, causing injury. Keep away from the rotating rotor.
• KEEP BYSTANDERS AWAY
WARNING:
Keep all bystanders, especially children and
pets, at least 50 feet (15 m) from the operating area.
• HOT SURFACE
WARNING:
Do not touch a hot engine. These parts get
extremely hot from operation and may cause severe burns.
When the unit is turned off the engine will remain hot for a
short time.
• OIL
Refer to operator's manual for the proper type of oil.
• PRIMER BULB
Push primer bulb, fully and slowly, 10 times.
• ROTATING BLADES CAN CAUSE SEVERE INJURY
WARNING:
Stop the engine and allow the blade to stop
before removing the blade, or before cleaning or performing any
maintenance. Keep hands and feet away from rotating blade.
It has been proven that fuel containing

Publicidad

loading