BTI PROFILINE -NTS 20 A Manual De Montaje página 12

9. Accessories
Fix the vacuum tube by inserting it in the corresponding
recesses in the rear wall of the container.
z
The wire basket is inserted from above into the suspen-
t
sion in the top section
10. Remedying faults.
Functional faults are not necessarily always due to a
defective appliance.
Fault:
– Decreasing suction
force.
– Appliance does not
start.
No other "interventions" are permitted; please consult the
servicing workshop.
1
.
Possible Cause/Remedy:
Clogged filter – Clean.
Paper filter is full – Change.
Container full – Empty.
Clogges motor protection filter –
Clean.
Clogged nozzle, tube or hose –
Clean
Is the plug inserted in the socket?
Mains failure?
Is the power supply cable broken?
Has the appliance hood been
properly closed?
Has the water sensor switched off
the appliance?
11. Technical data.
Appliance Rated
version capacity
BTI-NTS 20A 1200 W
Connecting cable for appliances with socket: H05VV F 3x1.5
Old appliances contain valuable materials that
can be recycled.
Do not dispose of such appliances with the
normal domestic waste but rather by way of
appropriate collecting points.
Typical sound level
Maximum
(acc. to
capacity
DIN EN 60704-1)
1400 W 69.0 dB(A)
13