5
Repeat steps 3 and 4 to change other letters.
Complete each button operation within 20 seconds.
6
Press EXE.
A beep sounds and the displayed letters are stored as the label.
If the flashing of the character stops
You took more than 20 seconds to complete a button operation.
If the display returns to the original label, press LABEL EDIT
again and start over.
To cancel editing
Press LABEL EDIT before pressing EXE.
Notes
• The SW STATION CALL labels cannot be edited.
• The unit does not beep if the beep is set to BEEP OFF (see "Turning off
the beep", page 43).
• An edited preset label returns to the default setting if a station is
overwritten to the preset button (see "Default preset labels", page 22).
Other operations
GB
37