Hansgrohe Citterio M 34213 1 Serie Instrucciones De Montaje / Manejo / Garantía página 6

3
2
1
4
5
1
6
3
2
3
English
(1) Push the spout shank up through the mounting
surface.
(2) Install the sealing ring, escutcheon, and shaft
fastening ring.
The notch on the shaft fastening ring
and the notch on the shank must face
away from the basin.
(3) Install the fiber washer, friction washer, and
mounting nut. Tighten the mounting nut.
Check the alignment of the handles.
If one is not aligned, (1) pull it off, (2) turn it slightly,
(3) and reinstall it.