Lockncharge iQ 16 Cart Manual De Instrucciones página 4

iQ 16 Cart™
STEP 5.
Attaching the cables to the iPad devices (up to 16).
Insert the iPad devices into the
baskets and place the baskets in
the drawers.
Slide the baskets into the drawers
and close the doors.
STEP 6 - Sync and/ or charge the devices.
Plug in the power cable to a wall socket and. Switch the power on. The LED will illuminate on the iQ 16 SCB
Sync Station depending on the operation you are performing.
Note: Refer to the Instructions for operating your iQ 16 SCB for syncing & charging operations.
Plug the USB B 'host' cable into
the iQ 16 SCB Sync Station.
The USB cables hang from the
swivel clips. Connect each plug to
a device in the basket.
Lock the doors.
Red = Charge mode
Green = Sync mode