Nebula Mars II Pro Manual Del Usuario página 13

2. Prepare the Remote Control
① For first-time use, remove the plastic battery insulation tab to
activate the remote control batteries.
② To replace the battery, slide off the battery compartment backplate
to open the battery compartment, insert new batteries (matching the
polarity (+/-) indicated), and close the battery compartment.
3. Get Started
① Fully charge the built-in battery before using for the first time.
② Connect the projector to the outlet by using the provided power
adapter and power cord, the built-in battery will be charged and the LED
indicators will light on.
DC IN
3
1
2
③ Slide down the lens cover, and the projector will automatically turn on.
When the projector is in standby mode, you can also press on the
remote control to turn it on.
④ Angle the projector towards a suitable projection surface or wall.
⑤ To focus the image, slightly move the projector to engage auto-focus
or press and hold the on the remote control to manually adjust.
For first time use, follow the on-screen instructions to complete the
basic set-up.
10