Nebula Mars II Pro Manual Del Usuario página 15

Projector Mode
You can connect Bluetooth headphones or a speaker to Mars II Pro
while it's in projector mode.
① On the home menu, select [Settings] > [Bluetooth] and press
② Follow the on-screen instructions to complete the Bluetooth
connection.
3. Projector
On the home menu, select [Settings] > [Projector], and press
[Image Mode]
[Color Temperature]
[Auto Keystone Correction] Enable / disable auto keystone correction.
[Keystone Correction]
[Auto Focus]
[Projector Mode]
12
[Auto] / [Standard Mode] / [Battery Mode]
[Normal] / [Cool] / [Warm]
Manually make keystone correction. The
default value is 0.
Enable / disable auto focus.
[Front]: The device is located in front of the
projection surface.
[Rear]: The device is located behind the
projection surface.
[Front Ceiling]: The device is hanging from
the ceiling in an upside-down position. The
image is rotated by 180 degrees.
[Rear Ceiling]: The device is hanging from
the ceiling in an upside-down position
behind the projection surface. The image
is rotated by 180 degrees and horizontally
mirrored.
.
.