Descargar Imprimir esta página

Sony CDX-MP80 Manual De Instrucciones página 17

Ocultar thumbs Ver también para CDX-MP80:

Publicidad

Idiomas disponibles

Idiomas disponibles

Storing only desired stations
You can manually preset desired stations.
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press the –m or M+ button to tune
in the station that you want to store.
4
Press (MENU), then rotate the
./> control dial until "Preset
Edit" appears.
5
Press the ./> control dial.
6
Rotate the ./> control dial to
select the number that you want to
store.
7
Press the ./> control dial.
The stored station indication appears in the
display.
8
Press (MENU) twice.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
Operating with the card remote
commander
1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
band.
3
Press (SEEK -) or (SEEK +) to tune in
the station that you want to store.
4
Press the desired number button ((1)
to (6)) until "MEM" appears.
./> control
dial
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press (MENU), then rotate the
./> control dial until "Name Edit"
appears.
3
Press the ./> control dial.
4
Enter the characters.
1 Rotate the ./> control dial to
select the desired character.
A
B
C
y
y
...
+
*
y
y
...
* (blank space)
2 Press the M+ button after locating
the desired character.
If you press the –m button, you can
move back to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
5
Press the ./> control dial.
Tips
• Simply overwrite or enter "
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
• If no memory is remaining, "Mem Full" appears in
the display, and you cannot assign a station name.
continue to next page t
0
1
2
y
y
y
...
y
A
y
*
y
" to correct or erase a
17

Publicidad

loading