Publicidad
Idiomas disponibles
Idiomas disponibles
2.3 c
D
onnecting the
rAin
Install the drain hose included and run it to a drain or a pail. This unit may generate a large amount of water in cooler weather. It is
necessary to install the drain hose properly to prevent water damage and/or material damage.
•
Cut the appropriate length of drain tubing (see illustration at
right).
•
Connect the tubing to the provided adaptor.
•
Make a water trap loop in the tube to prevent the unit from
drawing unpleasant odors from the drain source.
•
Add water in the loop to prevent noise or hiss.
•
Make sure there is a distance of at least 2" between the unit and
the tubing loop (see illustration at right).
•
Using tie wraps provided, attach the tubing as illustrated.
•
Run the tube to the floor drain or to an alternate drain pipe or
pail.
•
IMPORTANT: If using a pail to collect water, place the tube end
approximately 1" inside the pail in order to prevent water from
being drawn back up into the unit.
(hrV o
)
nly
CAUTION
≥ 2"(51 mm)
9 3/4" (248 mm)
± 1"(25 mm)
VO0296
8
5 1/4" (133 mm)
T
w
ie
rap
T
T
w
ie
rap
Publicidad
