Descargar Imprimir esta página

Bosch Indego 10 C Manual Original página 31

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
OBJ_BUCH-2369-005.book Page 31 Wednesday, November 9, 2016 1:42 PM
Warning: Operate the disabling
device before working on or lift-
ing the machine.
Caution: Do not touch rotating
blades. Sharp blade(s). Beware
of severing toes or fingers.
Wait until all machine compo-
nents have completely stopped
before touching them. The
blades continue to rotate after the ma-
chine is switched off, a rotating blade
can cause injury.
Pay attention that bystanders
are not injured through foreign
objects thrown from the ma-
chine.
Warning: Keep a safe distance
from the machine when operat-
ing.
Do not ride on the machine.
Battery charger contains a safe-
ty transformer.
Detachable supply unit.
Do not use a high-pressure
washer or a garden hose to
clean the robotic mower.
Operation
Before working on the machine it-
self (e. g. maintenance, tool
change, etc.) as well as during
transport and storage, remove the
isolator key from the machine.
Never allow children, persons with
physical, sensory or mental limita-
tions or a lack of experience and/or
knowledge and/or people unfamiliar
with these instructions to use the gar-
Bosch Power Tools
den tool. Local regulations may re-
strict the age of the operator.
Children should be supervised to en-
sure that they do not play with the
machine.
The operator or user is responsible
for accidents or hazards occurring to
other people or their property.
Do not operate the machine when
barefoot or wearing open sandals, al-
ways wear substantial footwear and
long trousers.
If any hazard occurs whilst the ma-
chine is operating immediately press
the red stop button.
Ensure correct installation of the pe-
rimeter wire as instructed.
Check the perimeter wire is fully
pegged to the ground avoiding any
slack lengths of wire.
Periodically inspect the area where
the machine is used and remove all
stones, sticks, wires and other for-
eign objects.
Do not run any live mains cables in
the working area.
Periodically inspect to see that the
blades, blade bolts and cutter assem-
bly are not worn or damaged. Replace
worn or damaged blades and bolts in
sets to preserve balance.
Never operate the machine with de-
fective guards or without safety de-
vices.
Do not put hands or feet near or un-
der rotating parts.
Never pick up or carry the machine
while the motor is running.
English | 31
F 016 L81 666 | (9.11.16)

Publicidad

loading

Este manual también es adecuado para:

Indego 13 c