Globestock GSE414G Instrucciones Para El Usuario página 12

5. Pre-Use Inspection
!
5.1. Visual Inspection
i. Inspect and confirm that the visual load indicator has not been activated. Remove the
SAVER from service immediately if the load indicator is deployed.
ii. Inspect and confirm the gate locking function of the snap hook.
iii. Inspect and confirm that all product labels are present and legible.
iv. Inspect the SAVER for structural damage and corrosion. Verify that the housing
attachments are tight; that there are no missing or altered parts; that there are no
cracks, deformations, or deep cuts in the housing or snap hook.
v. Inspect and confirm formal inspection record.
vi. Inspect the ferrules and thimble at the snap hook and confirm there is no evidence of
cracks, distortion, corrosion, or wear in the lifeline.
vii. Inspect the entire length of the lifeline and confirm there are no kinks, bends, bird
caging, changes in diameter, corrosion, or broken wires.
!
WARNING
Inspect the SAVER before every use according to the criteria
below.
Remove the SAVER from service and quarantine immediately if
it fails any of the pre-use inspections.
Consult the manufacturer or a competent person if you have
any doubts about any of the inspection criteria.
IMPROPER USE MAY RESULT IN SERIOUS INJURY OR DEATH.
Always maintain tension whilst extracting the lifeline on the
lifeline whilst extracting.
Do not let go of lifeline, allowing it to retract freely into the case.
IMPROPER USE MAY RESULT IN SERIOUS INJURY OR DEATH.
WARNING
12