Globestock GSE414G Instrucciones Para El Usuario página 9

3. Identification
Definitions of the markings on the SAVER product labels are provided in the table below. It
must be read in conjunction with Figure 3.
A. Important Information
Minimum capacity: 60 kg (132 lb).
i
Maximum capacity: 141 kg (310 lb).
Standard
ANSI
iii
CSA
EN360
B. Warnings
i Overhead anchor points only.
iii Suitable for one person only.
Maximum temperature: 54°C (130°F).
v
Minimum temperature: -40°C (-40°F).
vii Do not tamper with device.
C. Pre-Use Inspections
i Read user manual.
iii Check visual load indicator.
D. ID Label
i Date of manufacture.
iii Model.
v Lifeline diameter.
* G = Galvanised Steel
E. Manufacturer Information
Maximum Average
arrest force arrest force
1,800 lbf 1,350 lbf
(8 kN) (6 kN)
8 kN 6 kN
(1,800 lbf) (1,350 lbf)
6 kN -
S/S = Stainless Steel
ii Minimum fall clearance: 2.4 m (7 ft 9 in).
Anchorage must conform to either:
EN 795 or ANSI Z359 or CSA Z259 or be capable of
supporting a static load of 23 kN in each direction
permitted by the system.
iv
OR
EN 795 or be capable of supporting a static load of 12
kN in each direction permitted by the system.
ii Always avoid slack line.
Always maintain tension on the lifeline. Never allow it
iv
to retract freely into the case.
vi Do not use over edges or on abrasive surfaces.
viii Minimise pendulum effect.
ii Visually inspect before each use.
iv Confirm fall arrest brake.
ii Serial Number.
iv Working length of lifeline.
vi Lifeline material*.
P = Polymer (synthetic)
9
EN