Globestock GSE414G Instrucciones Para El Usuario página 15

!
6.3. Rescuing the User After a Fall
In the event of a fall, the user will remain suspended until raised or lowered to safety.
Follow the instructions below to rescue the user.
Models: GSE414G, GSE410SSK & GSE414P
i. Pull out and hold the Retrieval Mechanism Locking Trigger.
ii. Push the Crank Arm towards the SAVER housing to engage the retrieval mechanism.
The Crank Arm can be rotated slightly to assist engagement.
iii. Release the Retrieval Mechanism Locking Trigger.
iv. Rotate the Crank Arm 180° anti-clockwise to disengage the brake mechanism.
v. Raise or lower the user by rotating the crank arm in the appropriate direction. The user
will be held by an internal brake if the operator releases the crank arm during rescue.
1
Models: GSE430G, GSE425SSK & GSE430P
i. Pull out the Retrieval Mechanism Locking Trigger.
ii. Rotate the Crank Arm 180° anti-clockwise to disengage the brake mechanism.
iii. Raise or lower the user by rotating the crank arm in the appropriate direction. The user
will be held by an internal brake if the operator releases the crank arm during rescue.
1
WARNING
Do not rely on feel or sound to verify proper snaphook
engagement. Always visually check for proper engagement.
IMPROPER USE MAY RESULT IN SERIOUS INJURY OR DEATH.
2
2
3 4 4
15
EN