GRAPHITE 59G474 Manual Del Usuario página 8

OCHRONA ŚRODOWISKA
Produktów zasilanych elektrycznie nie należy
wyrzucać wraz z domowymi odpadkami, lecz oddać
je do utylizacji w odpowiednich zakładach. Informacji
na temat utylizacji udzieli sprzedawca produktu lub
miejscowe władze. Zużyty sprzęt elektryczny i
elektroniczny zawiera substancje nieobojętne dla
środowiska naturalnego. Sprzęt nie poddany
recyklingowi stanowi potencjalne zagrożenie dla
środowiska i zdrowia ludzi.
„Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka
komandytowa z siedzibą w Warszawie, ul. Pograniczna 2/4 (dalej: „Grupa
Topex") informuje, iż wszelkie prawa autorskie do treści niniejszej
instrukcji (dalej: „Instrukcja"), w tym m.in. jej tekstu, zamieszczonych
fotografii, schematów, rysunków, a także jej kompozycji, należą wyłącznie
do Grupy Topex i podlegają ochronie prawnej zgodnie z ustawą z dnia 4
lutego 1994 roku, o prawie autorskim i prawach pokrewnych (tj. Dz. U.
2006 Nr 90 Poz 631 z późn. zm.). Kopiowanie, przetwarzanie,
publikowanie, modyfikowanie w celach komercyjnych całości Instrukcji jak
i poszczególnych jej elementów, bez zgody Grupy Topex wyrażonej na
piśmie, jest surowo zabronione i może spowodować pociągnięcie do
odpowiedzialności cywilnej i karnej.
GWARANCJA I SERWIS
Warunki gwarancji oraz opis postępowania w przypadku reklamacji
zawarte są w załączonej Karcie Gwarancyjnej.
Serwis Centralny GTX Service Sp. z o.o. Sp.k.
ul. Pograniczna 2/4 tel. +48 22 364 53 50
02-285 Warszawa e-mail
Sieć Punktów Serwisowych do napraw gwarancyjnych i pogwarancyjnych
dostępna na platformie internetowej gtxservice.pl
Zeskanuj QR kod i wejdź na gtxservice.pl
EN
Original (operating) manual
Chain Electric Lawnmower
CAUTION: READ THIS MANUAL CAREFULLY BEFORE USING THE
POWER TOOL AND KEEP THIS MANUAL FOR FUTURE REFERENCE.
SPECIFIC SAFETY PROVISIONS
SAFETY INSTRUCTIONS FOR USE OF LAWNMOWERS
Safety in practice for mains-powered mowers
1. instruction
a. Read the instructions carefully. Familiarize yourself with the controls and
proper use of the unit.
b. Never allow children or anyone not familiar with the unit's operating
instructions to operate the unit. National regulations may specify the exact
age of the operator.
c. Never mow when other people, especially children or pets, are around.
d. Remember that the operator or user is responsible for accidents or
hazards that occur to other people or the environment.
2. preparation
a. Always wear sturdy shoes and long pants when mowing. Do not operate
the machine with bare feet or in open sandals. Avoid worn clothing that is
too loose or that has dangling straps or ribbons.
b. Carefully inspect the area where the unit will be operated and remove
all objects that could get into the unit.
c. Always inspect knives, bolts, and knife assembly hardware for wear or
damage before use. Replace worn or damaged parts in assemblies to
maintain balance. Replace damaged or illegible plates.
d. Inspect the power cord and extension cord for damage or wear before
use. If the cord has been damaged during use, disconnect it from the direct
power supply.
DO NOT TOUCH THE CABLE BEFORE DISCONNECTING THE
POWER. Do not use the device if the cable is damaged or destroyed.
bok@gtxservice.com
59G474
3 Use
a. Bark only in daylight or with good artificial lighting.
b. Avoid mowing wet grass.
c. Always make sure your feet are standing firmly on an incline.
d. Come on, never run.
e. Mow across the slope, never up or down.
f. Use extreme caution when changing direction on a slope.
g. Do not mow on excessively sloping hillsides.
h. Pay special attention when reversing or pulling the unit towards you.
i. Disengage the drive of the cutting element(s) if the unit must be tilted
when moving it over non-grass surfaces and when being transported to
and from the mowing area.
j. Do not use the unit with damaged covers or housings or without a safety
device, such as the enclosed covers and/or grass bins.
k. Start engine carefully as instructed, making sure feet are away from
cutting piece(s).
l. Do not tilt the machine when starting the engine, except when it needs
to be tilted during start-up. In this case, do not tilt more than necessary and
lift only that part which is away from the operator.
m. Do not operate the unit while standing in front of the discharge opening.
n. Do not keep hands or feet near rotating parts. Watch that the ejection
port is not clogged at all times.
o. Do not carry the unit with the engine running.
p. Stop the unit and pull the plug out of the socket. Make sure that all
moving parts are not in motion
- every time you walk away from the device,
- before cleaning or pushing the outlet,
- before inspecting, cleaning, or repairing the unit,
- after being struck by a foreign object. Check the unit for damage and, if
necessary, make repairs before restarting and operating the unit if the unit
begins to vibrate excessively (check immediately)
- check for damage,
- Replace or repair any defective part,
- Check and tighten any loose parts.
4 Maintenance and storage
a. Maintain all nuts, bolts, and screws in good condition to be sure the unit
will operate safely.
b. Check the grass container frequently for wear or damage.
c. On multi-blade units, be careful as rotation of one cutting element may
cause rotation of other blades.
d. Be careful when adjusting the unit to avoid getting your fingers between
the moving blades and the fixed parts of the unit.
e. Always leave the unit to cool down before the next start-up.
f. Use caution when operating the knives even though the drive is off, as
the knives may still be rotating.
g. Replace, for safety reasons, worn or damaged parts. Use only original
spare parts and equipment.
5. recommendations for class II equipment
The device must be powered by a residual current device (RCD) with a
tripping current of no more than 30 mA.
Explanation of pictograms used
1. WARNING Read this manual
Keep bystanders at an adequate distance
3. be careful of the sharp edges of the knives. The knives rotate when
the motor is switched off - Pull the plug out of the mains socket before
maintenance or if the power cord is damaged
Keep the flexible power cord away from the cutting element
Protection class IPX4
6 Second class protection
Wear personal protective equipment (safety goggles, ear defenders)
8. use protective clothing
9. keep children away from the tool
10. protect the unit from moisture
11. recycling
12. Maximum slope you can work on
CONSTRUCTION AND APPLICATION
The electric lawnmower is a class II insulated machine. It is driven by a
single-phase AC commutator motor. The mower is designed for mowing
lawns in the home garden. Only use accessories suitable for this machine
8