Publicidad
Idiomas disponibles
Idiomas disponibles
T60P Series Installation
Valve Trim Installation
4
(See page 8 & 9 for Siderna® valve trim installation.)
A.
1
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut.
C.
3
Secure the escutcheon (1) to the bracket
(2) using the 2 screws provided (3). Do not
overtighten escutcheon screws.
100501 Rev. B
2
2
1
B.
2
If your model requires a spacer (1), insert
it into the sleeve (2) and push it to the
front. Slide the sleeve over the cartridge,
body and O-ring.
D.
7
4
5
6
Slide trim ring (1) over trim sleeve (2)
and insert into escutcheon (3). Models
T60P210 & T60P410 - Secure handle (4)
onto the stem using screw (5) and a
phillips head screwdriver. Insert button
(6)into handle. Other models - Secure
handle onto the stem using set screw and
Allen wrench (7).
7
1
1
2
3
1
2
1
Publicidad
