Publicidad
Idiomas disponibles
Idiomas disponibles
4. Basic Operation
4.1 Menu Settings
EN
EN
The E2 dash cam has 3 function menus, which are: record settings, system
settings, and file browsing. You can set your dash cam according to your
requirements with these function setting.
Press the
enter the menu settings.
A. Record Setup
-Resolution: The E2 camera has 2 resolution modes: Front + Rear dual
recording mode, or Single front recording mode.
Front+Rear Camera:1944P+1944P 24FPS; 1440P+1440P 30FPS;
1440P+1080P 30FPS; 1080P+1440P 30FPS; 1080P+1080P 30FPS; 1080P+720P
30FPS; 720P+1080P 30FPS; 720P+720P 30FPS
Front Camera only:2592x1944P 30FPS; 2560x1440P 30FPS; 1920x1080P
30FPS; 1280x720P 30FPS
-Loop Recording: Default setting is 3 min. You can choose the options
among 1/3/5 min and OFF.
-G-Sensor: Select the level of G-sensor you need, then you can set 3
directions (Front + Rear/Left + Right/Up + Down). The G-sensor value in
each direction can be selected as 1/2/3/4/5/Off. The higher the sensitivi-
ty level, the easier it is to trigger event recording. G-sensor is most
sensitive when set to 5.
-Audio Recording: The default is ON. Set recording to on or off.
button, pause the video first, then press the
Record
System
Files
- 18 -
button to
Publicidad
