Descargar Imprimir esta página

VANTRUE Element 2 Manual De Usuario página 32

Ocultar thumbs Ver también para Element 2:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
EN
Note: If the dash cam continues to be hit during the collision detection
recording, it will exit the collision detection mode and enter normal
recording, restarting the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the
the recording interface, indicating that the dash cam is currently in
motion detection mode. Motion detection has three levels: low/medi-
um/high that can be adjusted, and the corresponding detection ranges
for motion detection is 6.6ft/13ft/19.7ft.
After entering motion detection mode, the
the middle of the screen. The dash cam enters standby mode and the
screen will turn off after 3 minutes with no motion detected.
1440P+1440P 30FPS
00:00:37
14:39:07
1440P+1440P 30FPS
14:39:07
00:00:37
- 28 -
35
11-18-2022
MP/H
icon will be displayed on
35
11-18-2022
MP/H
icon will be displayed in

Publicidad

loading

Este manual también es adecuado para:

E2