Garland HUNTER 755 SG Manual De Instrucciones página 44

English
case, more than absolutely necessary do not tilt it,
and lift only the part farthest from the operator.
6.4.2.1. COLD-STARTING THE ENGINE
Place the machine on a flat and stable surface in
order to start it.
Press the primer bulb several
times to ensure that the fuel
has reached the carburettor.
(depending engine model).
Push the safety switch bar until it touches the upper
handle.
Allow the engine to warm up for a few minutes
before starting to use the machine.
Place yourself behind the
mower as shown in the
figure and pull the Starter
rope until the engine starts.
6.4.2.2. STARTING WITH A HOT ENGINE
Place the machine on a flat and stable surface in
order to start it.
Push the safety switch bar until it touches the upper
handle.
Place yourself behind the mower and pull the Starter
rope until the engine starts.
If after a few tries the engine does not start, follow
the instructions for starting cold-starting the engine.
6.5. STOPPING THE ENGINE
Turn of the engine by releasing the safety switch.
6.6. TRACTION DRIVE
Press the traction handle against the handlebar, as
shown in the figure, and the mower traction will start
operating.
44/184