Publicidad
Nota: nel momento in cui l'app DOOR ENTRY è collegata con l'impianto (es. rispondere ad una chiamata, visualizzare un Posto Esterno, ecc.), non si possono
eseguire altre operazioni ad eccezione del tasto apertura serratura e Tasto Preferiti (configurato per la funzione Luci Scale o Comando Diretto Serratura ) che
continuano a funzionare.
L'immagine rappresenta il dispositivo con tutte le funzioni abilitate. Verifica sul manuale installatore come abilitare le funzioni.
I manuali completi sono disponibili sul sito: www.bticino.com
1 -
7" (Touch screen) display
2 -
OFF key
3 -
App: touch to display the information page where
you find a QR code that allows the download of the
DOOR ENTRY app to interact with your device
4 -
Date and time
5 -
Wi-Fi Connection
6 -
Device/app association and enabled/disabled for-
warding of call
7 -
Bell exclusion
8 -
Office activation
9 -
Answering machine activation
10 -
Microphone
11 -
Quick actions
12 -
Tactile guides for the blinds
13 -
Connection key:
The green LED flashes to indicate an incoming call
The green LED comes on steady to indicate that
there is an active call
14 -
Auto-switching on/Cycling:
The red LED turns on when the key is pressed
15 -
Favorites Key: the red LED turns on when the key is
pressed (Basic configuration = STAIRCASE LIGHT. For
a different configuration refer to the physical con-
figuration table in the following pages.)
16 -
Door lock release key:
The red LED turns on when the key is pressed
Wireless device in compliance with 802.11b/g/n standard, frequency 2.4 – 2.4835 GHz, transmission power < 20 dBm.
WEP/WPA/WPA2 safety protocol.
Note: when the DOOR ENTRY is connected to the system (e.g. answer a call, display an Entrance Panel, etc.), no operations can be made, with the exception of
the door lock release key and Favorite Key (configured for the Staircase Light or Door Lock Direct Control functions) that continue to operate.
The image shows the device with all its functions enabled. Check on the Installer Manual how to enable the functions.
The complete manuals are available on the website: www.bticino.com
17 -
Wi-Fi Status:
Red LED flashing = Wi-Fi is active but not connected
to a network
LED off = disabled or properly functioning Wi-Fi
Green LED fixed = the Classe 300X is exchanging
data with the DOOR ENTRY app (forwarding of call,
auto-switching on, configuration)
18 -
Message status:
Red LED flashing = new unread note/s or message/s
in the answering machine
19 -
Bell exclusion Status: Red LED on = Call bell disabled
20 -
Functions (only the icons for the configured func-
tions are displayed)
21 -
Configurator seat (See "Configurator Functions")
22 -
Configurator J1: remove if the additional power sup-
ply is present (clamp 1 and 2)
23 -
J2 configurator: for correct operation do not remove
24 -
Line termination ON/OFF micro-switch
25 -
Mini USB socket for device Firmware update
26 -
Loudspeaker
27 -
Additional power supply clamps (1 - 2)
28 -
2 WIRE SCS/BUS connection clamps
29 -
Clamps (
) for the connection of an external call
to the floor pushbutton
30 -
Additional bell connection clamps (1 - 5M) Point-to-
Point connections are required on the clamps of the
additional bells
Video Kit
13
Publicidad
