Publicidad
Idiomas disponibles
Idiomas disponibles
APPLIANCES WITHOUT FITTED PLUG
FITTING A PLUG – IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
GREEN & YELLOW : EARTH
BLUE
BROWN
As the colours in the mains lead of the appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN & YELLOW must be connected to the terminal in
the plug which is marked with the letter "E" or by the earth symbol _ or coloured green
or green and yellow. The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter "N" or coloured black. The wire which is coloured
BROWN must be connected to the terminal which is marked with the letter "L" or
coloured red.
USING THE BLENDER
- Before first use, wash all the parts except the Blender base under lukewarm water
and then dry them with a dry cloth.
- Never dip the Blender in water; this part must be cleaned with a dry cloth only.
- Place the blender jar on the appliance base, fitting the jar notches into the base juts.
- Place the ingredients into the blender jar, not exceeding the maximum limit of the
blender jar (800 ml ) to prevent splashing.
- Make sure that the blender jar is correctly positioned.
- Place the lid and the mini-lid onto the blender jar, check that they are in the correct
position and connect the appliance.
- Choose the desired speed:
• 1: lowest speed
• 2: highest speed
• 0: stop
• Function «Pulse»: Intermittent function for a better control of your food preparation
at the maximum speed.
- As soon as the preparation is to your taste, turn the switch to the "0" setting to stop
the appliance.
Wait until the blade stops completely and then empty the jar.
- The Blender has a safety system, which avoids the appliance to work, whenever the
blender jar is not in its correct position.
PRACTICAL HINTS
- Use always fresh fruit and vegetables since they are juicier.
- The more adequate ingredients for making juice are: pineapples, apples, carrots,
melon, tomatoes, oranges and grapes.
- The harder and gummier fruits, such as bananas, papayas, avocados, figs and mangos
should not be processed in a blender, but in a centrifuge.
- It is not necessary to peel the fruits (except those with thicker peel, such as oranges
or pineapples).
- The vegetable leaves and stems can also be processed in the bender.
- The apple juice oxidises very quickly. If you add to it some drops of lemon juice you
may delay the oxidation process.
- Vegetable pulp may be used as a base for the preparation of soups, sauces and jams.
CLEANING AND MAINTENANCE
For a quick cleaning:
- Pour lukewarm water into the blender jar, position the switch to setting "1" during
some seconds and then empty the jar.
: NEUTRAL
: LIVE
15
Publicidad
