Grundig GDKP2460BC Manual Del Usuario página 8

OPERATION OF THE APPLIANCE ______________________
Controlling the Appliance
KEY
(A) : 1. Stage Button
(B) : 2. Stage Button
(C) : 3rd Stage Button
(D) : Light On / Off
Energy Efficient Usage
When using your appliance, adjust the speed
■
settings according to vapour and odour intensity,
in order to save energy.
Use low speeds (1-2) under normal conditions,
■
and high speed (3) for intense odour and vapour.
The lamps on the hood are placed for illuminat-
■
ing the cooking area.
Using them for environmental lighting shall cause
unnecessary energy expenditure and insufficient
lighting.
Operating the Hood
Your appliance contains a motor that has various
■
speeds.
For better performance, we recommend using
■
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
You can start your appliance by pressing on the
■
desired speed setting button. (A, B, C)
You may illuminate the cooking area by pressing
■
the lamp (D).
8 ENGLISH
A B
FUNCTION
Operates the appliance on 1st speed. When you press this button again to turn off
the appliance, the screen speed stage turns off.
Operates the appliance on 2nd speed. When you press this button again to turn
off the appliance, the screen speed stage turns off.
Operates the appliance on 3rd speed. When you press this button again to turn off
the appliance, the screen speed stage turns off.
You may illuminate the cooking area by pressing this button. Re-press the button
to turn off the lamp.
C
Automatic Stop
Your appliance has Automatic Stop feature, ena-
bling it to ventilate for a bit more and remove the
unwanted odours and vapour inside the environ-
ment and turn off automatically after the cooking
is done. To enable Automatic Stop feature, press
the any speed stage button (A, B, C) on the control
panel for longer than 2 seconds; the 15-minute
timer function shall be activated. When the au-
tomatic stop feature is active, pressing the same
speed button shall disable the automatic stop func-
tion and the appliance's motor shall stop. This fea-
ture is disables when you switch between different
speed stages. If you want the appliance to stop au-
tomatically, you need to enable the automatic stop
feature again.
D