Klarstein First Class 36 Manual Del Usuario página 23

FILLING THE WINE DISPENSER
1
Use this button to turn the wine dispenser on and off.
2 Insert the plastic tube into the wine bottle before attaching it.
If the bottle has a screw cap, unscrew the supplied adapter first. Slide the
3
holder upwards and insert the bottle neck (or adapter) into the holder.
4 Then move the holder back down and make sure that the bottle is tight.
• Once you have secured the bottles, press the ON/OFF button to the left of the
bottle holders to turn on the wine dispenser.
• To pour wine into a glass, hold the glass under the tap and press and hold the ON/
OFF button above the tap until you have filled the desired amount of wine. Then
release the button.
Note: Follow the cleaning instructions to ensure optimum operation of the wine
dispenser.
EN
23