Trevi CMP 534 USB Manual De Uso E Instalación página 6

ENGLISH
DANGEROUS VOLTAGE
This symbol appearing on the rear side of the
appliance and in this manual indicates that inside the
appliance some devices are using high-voltage, so do
not open it to avoid electric shock risks.
NOTES ON USE
This is a delicate electronic appliance. Avoid using it in the following cases:
• Near strong heat sources, such as central heating plant or stoves.
• In very humid places such as bathrooms, swimming pools, etc.
• In very dusty places.
• In places subject to strong vibrations.
■
Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).
■
Do not block the air vents.
■
If any liquid enters the appliance, unplug it from the external power socket at once and take it to the nearest TREVI authorised after-sales centre.
■
Before switching the appliance on, always check that the feeder and connection cables are correctly installed.
MAINTENANCE
To clean the appliance, use a soft, slightly dampened cloth. Avoid any solvent or abrasive substance.
IMPORTANT
The good manufacture of this appliance grants a perfect operation for a long time. Should any trouble arise, please contact the nearest authorised After-sales Centre.
TREVI follows a policy of ongoing research and development. The products may therefore have features different from those described.
DESCRIPTION OF CONTROLS
1. VOLUME control
2. OFF/TUNER/CD-MP3-USB selector
3. Carrying handle
4. POWER indicator
5. FM STEREO indicator
6. USB port
7. CD tray opening
8. CD tray
9. FOLD-/-10 key, folder selection
10. FOLD+/+10 key, folder selection
11. BBS key, bass boost
13. Tuning dial
14. AM/FM/FM STEREO frequency band selector
POWER SUPPLY
BATTERIES
Open the battery compartment (26) and insert 6 "C" (UM-2) batteries, carefully respecting the indicated polarities. Replace immediately the flat batteries and
remove them if you do not intend using the appliance for a long period of time.
MAINS SUPPLY
Connect the power cable to the socket (27). Fit the plug into an AC 220V - 50Hz socket. Do not plug the appliance to different power.
RADIO FUNCTION
1. Switch the selector (2) to TUNER, the POWER indicator (4) lights up.
2. Select the frequency band (AM/FM/FM stereo) that you prefer by switching the selector (14).
3. Select the station that you prefer using the TUNING control (16).
4. When receiving a stereo station, the FM ST indicator (5) lights up.
5. Adjust the volume as desired using the VOLUME control (1).
6. If you hear background noises while listening to an FM stereo station, turn the selector (14) to FM.
NOTES
To obtain the best reception in FM, extend and orient the antenna (25). If the reception is bad, try adjusting the length and orientation of the antenna. However,
the reception quality depends very much on the place where the appliance is situated.
The AM antenna is located inside the appliance; therefore, you need to orient the appliance to obtain the best reception.
The nearness of TV appliances, neon lamps or other household appliances can create disturbance in receiving radio programs; move the radio recorder responsible
for the disturbance away from the appliance.
WARNING
This symbol appearing on the rear side of
the appliance and in this manual indicates
that the same contains very important
instructions for user safety. Read them
carefully before using the appliance.
15. CD Display
16. TUNING control, tuning
17. Speakers
18. PLAY/PAUSE/USB key, CD playback/pause / USB port selection
19. NEXT key, skip to next track
20. BACK key, skip to previous track
22. PROG/P.MODE key, CD programming
23. STOP key, CD stop
24. Headphone socket
25. FM antenna
26. Battery compartment
27. Power supply AC 220V 50Hz
6
CMP 534 USB
WARNINGS ON LASER
This appliance is fitted with a laser beam scanning
system. Although the laser uses a weak current and
is provided with a safety device which prevents
operation with the door open, strictly follow the
precautions given below:
do not bring your eyes close to the laser lens if the
appliance is open, as there is risk of injuring the
retina.
do not disassemble nor tamper with the laser unit,
as there is a risk of absorbing radiations.