Num'axes SL1008 Manual De Instrucciones página 61

EXAMPLES:
#1: If a user selects the Time Lapse mode, and sets the Start
Time at 07:00 and End Time at 20:30, then selects the Time Out
to be 3 minutes with a Burst mode of 3 pictures, this means that
the camera will take 3 pictures every 3 minutes within the time
frame of 7:00AM to 8:30PM. When not within the Time Lapse
time frame, the camera will follow the normal PIR detection
settings.
#2: If a user selects the Time Lapse mode setting as Start Time
00:00 and as End Time 00:00, then selects the Time Out to be
5 minutes with a Burst mode of 3 pictures, this means the
camera will take 3 pictures every 5 minutes, 24 hours a day non-
stop.
Time Lapse Mode Setup Recommendations
If you are using the Time Lapse feature and want to extend the
battery life and get as many pictures as possible, we recommend
you use the following settings:
Batteries: Lithium Batteries
Image resolution: 3M
Time Out: More than 15 seconds
SL1008 - Indice A 61/200