Camera Setup And Program - Num'axes SL1008 Manual De Instrucciones

Camera Setup and Program

When you slide the power switch to the A, B or MANUAL
position, the status display shows the camera status.
This camera is equipped with 2 preset settings (A and B) and 1
programmable setting (MANUAL).
Setting the Preset Selection Mode
NOTE: If you choose one of the Preset settings, your
camera will only function in PIR mode (it will not
function in Time Lapse mode).
•
A (Preset A) - This bypasses all
user defined settings and uses
the following settings: PIR mode
/ Still image / Resolution: 5MP /
Burst: 3P (3 images per trigger)
/ Time out: 30 seconds
•
B (Preset B) - This bypasses all
user defined settings and uses
the following settings: PIR mode
/ Video: 10 seconds video /
Video resolution: 720P / Time
out: 30 seconds
SL1008 - Indice A 52/200