Publicidad
Idiomas disponibles
Idiomas disponibles
MACHINE MAINTENANCE
CHECK FLUID LEVEL See Set Up (pg 6)
Remove dipstick
Pour OEM-Approved Vapor Producing Fluid into Fluid Fill Port until fluid level
reaches top line of Dipstick
Replace Dipstick
Check fluid level every 50 - 100 tests
Do not overfill
CLEAN FLOW METER
Disconnect air supply and power from the machine
Remove Flow Valve with 12mm Wrench
Tilt machine forward to drain flowmeter of residue fluid
Reinstal flow valve
Do not use alcohol / cleaners on flow meter
DRAIN VAPOR HOSE
Elevate the machine
Allow the entire vapor hose to hang downward
Place a container beneath the nozzle to capture fluid
Process takes approximately 5 minutes
12
MDSMOKELITE
Publicidad
