Ryobi RY120PWA Manual página 4

■
Do not use the product if the power cord
or other important parts, such as safety
devices, are damaged.
■
Check the power cord and the extension cord
for damage before each use. If the power
cord or the extension cord is damaged, it
must be replaced by the manufacturer, its
service agent, or similarly qualified persons
in order to avoid a hazard.
■
Before every use, examine the supply cord
for damage. If there are signs of damage, it
must be replaced by a qualified person at an
authorised service centre to avoid a hazard.
■
Keep the power cord away from heat, oil,
and sharp edges.
■
Never touch the mains plug and the socket
with wet hands.
■
Inadequate extension
dangerous. If an extension cord is used,
it shall be suitable for outdoor use, and
the connection has to be kept dry and off
the ground. Use a cord wheel to keep the
socket at least 60 mm above the ground.
■
The electric supply connection shall be
made by a qualified electrician and comply
with IEC 60364-1. It is recommended that
the electric supply to this product should
include either a residual current device
that will interrupt the supply if the leakage
current to earth exceeds 30 mA for 30 ms
or a device that will prove the earth circuit.
ADDITIONAL SAFETY WARNINGS
■
Some regions have regulations that restrict
the use of the product in some operations.
Check with your local authority for advice.
■
Before each use, check the product for
damage. A damaged high-pressure hose
must be replaced. Ensure that all connections,
such as high-pressure hose and nozzle, are
secure. Unwind the hose properly so they
may not get twisted or kinked.
■
Do not allow children or untrained individuals
to use the product.
■
Before starting any cleaning operation,
close doors and windows. Clear the area to
be cleaned of debris, toys, outdoor furniture,
or other objects that could create a hazard.
■
Never pick up or carry the product while the
motor is running.
■
Do not use the product in temperatures
below 0°C.
4
Original Instructions
■
■
dangerous if subjected to misuse. The jet must
not be directed to people, animals, electrical
devices, or the product itself.
■
■
cords can be
■
■
■
■
■
■
■
■
■
Do not use acids, alkalines, solvents,
flammable material, bleaches, or industrial
grade solutions in the product. These products
can cause physical injuries to the operator
and irreversible damage to the product.
Always operate the product on a level
surface.
WARNING! High pressure jet can be
Hold the trigger handle securely with both
hands. Expect the trigger handle to move
when the trigger is pulled due to reaction
forces. Failure to do so could cause loss of
control and injury to yourself and others.
Make sure that the air in the hose and pump
is released before you turn on the product.
To remove the air in the hose and pump,
connect the water supply to the pump using
a garden hose, connect the trigger handle
to the pump using the high-pressure hose,
disengage the trigger handle lock, and
press the trigger until there is a steady flow.
Exercise caution to avoid slipping or falling.
Keep firm footing and balance. Do not
overreach. Overreaching can result in loss
of balance.
Use only accessories that are recommended
by the manufacturer. The use of improper
accessories may cause injury.
Never leave the
unattended. Turn off the product. Do not
leave the product if it has not come to a
complete stop.
Be familiar with the controls. Know how to stop
the product and bleed the pressure quickly.
Stay alert and exercise control. Watch what
you are doing and use common sense.
Do not use the product while tired, ill, or
under the influence of drugs, alcohol, or
medication. A moment of inattention while
operating the product may result in serious
personal injury.
Do not use the product if the switch does not
turn it on and off. Any product that cannot
be controlled with a switch is dangerous
and must be repaired.
Keep a minimum distance of 30 cm when
cleaning vehicles. The high pressure jet
may damage or burst vehicle tires and/or
tire valves.
product running