Publicidad
Idiomas disponibles
Idiomas disponibles
– If the lens is exposed to water droplets or other
liquids, wipe them off with a soft, dry cloth.
To improve the dust and splash resistant performance
0
of the lens, a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the
digital camera mount, but this does not impact
performance.
– For information on changing the lens mount rubber,
contact Panasonic.
∫ Condensation (when the lens is fogged up)
Condensation occurs when the ambient temperature or
0
humidity changes. Please be careful, as it may cause
lens stains, mold and malfunction.
If condensation occurs, turn off the digital camera and
0
leave it for approx. 2 hours. The fog will disappear
naturally when the temperature of the digital camera
becomes close to the ambient temperature.
The appearance and specifications of products
0
described in this document may differ from the actual
products you have purchased due to later
enhancements.
Supplied Accessories
Check that all the accessories are supplied before using
the product.
Product numbers correct as of May 2019. These may be
subject to change.
1
2
DVPY1015Z
DVZE1036Z
1 Lens pouch
2 Lens hood
3 Lens cap
¢
4 Lens rear cap
¢
Fitted to the lens at the time of purchase.
¢
3
4
1GE1Z253Z
VFC4605
19
DVQX1834
(ENG)
Publicidad
