Descargar Imprimir esta página

Hisense Hi-Therma Serie Manual De Instalación Y Mantenimiento página 19

Ocultar thumbs Ver también para Hi-Therma Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
UNIT INSTALLATION
6 UNIT INSTALLATION
6.1 MAIN PARTS (DESCRIPTIONS)
No.
Part
Indoor unit
1
front panel
2
Indoor unit
2
surrounding panel
Master controller
3
&
controller frame
4
Piping connections
6.2 REMOVING THE PANELS
If it is necessary to access to the indoor unit components,
please follow these operations.
6.2.1 Removing the front panel
?
N O T E
The indoor unit front panel needs to be removed for any task
inside the indoor unit.
1. Unscrew 1 screw at the bottom of the indoor unit and 2
screws on the top of unit.
2. Remove the front panel.
1
3
4
!
6.2.2 Opening the electrical box
!
7
Step 2 Push the front panel forward,
disengage the snap, and front
panel can be removed.
Step 1 Push the front panel upward.
C A U T I O N
Take care with the LCD display of the master controller while removing
the front panel.
Be careful not to drop the front panel during operation.
Take care when removing front panel, the parts inside the unit could
be hot.
D A N G E R
Disconnect the unit from the power supply before touching any
of the parts in order to avoid an electric shock.
Step 1 Unscrew
the 3 screws.
*Handle on electrical box cover can be
used to hang the master controller.
Step 3 Pay attention
to the wire connected
master controller and
electrical box. Do not
pull the wire,
otherwise may cause
the breakage. Unplug
the terminal to
release the front
panel.

Publicidad

loading