DeWalt DW742 Manual Del Usuario página 27

FLIP-OVER SAW DW742
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Voltage
(U.K. & Ireland only)
(Latin America only)
Motor power (input)
Motor power (output)
Blade diameter
Blade bore
Max cycle of use load/no load
No-load speed (50/60 Hz)
Saw head pre-set locations left/right
Bevel adjustment
Cutting capacities
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
18
WALT one of the most
E
DW742
V 230
V 230/115
V 120
W 1,650
W 1,100
mm 250
mm 30
min 1/3
min -1 3,000/3,600
° 0-45
° 0-45
see under "Description"
kg 38
10 Amperes, mains
13 Amperes, in plugs
EC-Declaration of conformity
DW742
D WALT declares that these Power Tools have been designed in
E
compliance with: 98/37/EEC, 89/336/EEC, 73/23/EEC, EN 61029,
EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
en - 1
en - 1
For more information, please contact D
en - 2
en - 3 refer to the back of the manual.
en - 3
en - 4 Level of sound pressure according to 86/188/EEC & 98/37/EEC,
en - 4 measured according to DIN 45635:
en - 4
en - 4
L (sound pressure)
en - 6
pA
L (acoustic power)
en - 8
WA
en - 8 * at the operator's ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to DIN 45675:
TÜV Rheinland
Product and Safety GmbH (TRPS)
Am Grauen Stein 1
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E N G L I S H
WALT at the address below or
E
DW742
dB(A)* 83
dB(A) 96
DW742
-
Cert. No.
BM 9910081 01
en - 1